Ridging is used to cover the gap between two sheets in the ridge line. A roof “ridge” refers to the uppermost peaks created by the junction of two roof slopes facing opposite directions.
End wall flashing help in directing the flow of rainwater to away from the building.End wall flashing is used where there is a lean-to type roof sloping away from the vertical wall.
Crimp curving can lead to distinctively different designs options. Crimp curving promotes ‘smooth looks’ by eliminating the need for a ridge flashing and changes in pitch flashing
Corner flashing help in directing the flow of rainwater away from the building. Detailed features like Drip flashing and Opening Flashing catches the rainwater in problem areas.
Valley Gutter is used at the internal angle formed by the intersecting of sheets on a roof or by the slope of a roof and a wall to protect from leakage.
Crimp curving promotes ‘smooth looks’.Crimped ridge cover is used to keep debris, insects, and rain from getting in between the panels and ridge cap.
A Box Gutter is a rain gutter usually rectangular in shape.The water is drained via down pipe nozzles in the box gutter. Box Gutter allows water to flow out externally to the building.
Features like Internal Corner flashing too greatly help in directing the flow of rainwater to the desired distance away from the building.
Ridging is used to cover the gap between two sheets in the ridge line. A roof “ridge” refers to the peaks created by the junction of two roof slopes facing opposite directions.
It is used for a flashing located at the juncture of the top of a sloped roof and a vertical wall, chimney or steeper-sloped roof.
Detailed features like Drip flashing catch the rainwater in problem areas.It helps in taking away rainwater away from the building.
Flashing is a strip of a sheet used to stop water from penetrating the junction of a
roof with another surface like a wall, etc. Opening Flashing catch the rainwater in problem areas.
SDST (Self Drilling Self Tapping) screws
Standard AS 3566
The AS 3566 is a standard established by the Standard Association of Australia to specify the requirement for a Self Drilling Screw to be suitable for use in Steel and Timber purlins.
Class 3 Coating is a unique anti-corrosive coating system consisting of 3 distinct layers which combine to give exceptional protection.
Anti Corrosive Test
1000 Hours Salt Spray test done by Regional Testing Center( Govt. of India) New Delhi and Sriram Institute for Industrial Research- New Delhi.
Coated with Xylan to prevent rusting.
Corrosion proof SDST(Self Drilling Self Tapping) screws with EPDM washers ensure a strong and weather-tight attachement.
PVC Color Caps
PVC Colour Caps are provided to match with the colour of the sheets for an aesthetic look.
Carbon Steel Grade-1022
13RE Drilling Machine
Tek points of SDST screws act as a drilling bit, with the help of 13RE drilling machine it gets drilled and tap their own threads into purlins.
Self Drilling,self tapping screws is highly suitable for steel and timber purlins. Unique anti-corrosive coating system and Xylan coating prevents rusting and ensures weather type attachment.